Key Specifications/Special Features:
I Product introduction
The pressure transmitter is mainly applied to measure pressure, negative pressure, absolute pressure and other technical data of gas, liquid or vapor, then converts these data into 4~20mA DC signal output. It can connect with HART manipulator to promote self-diagnosis, reset measuring range and auto-zero functions. One side of pressure transmitter's δ cell receives measured pressure,
meanwhile, the other side connects with the air to detect pressure or negative pressure
Applications
Measuring pressure of pipeline and storage tank in petroleum, petrochemical and chemical industry.
Meeting high stability and precision requirements in electric power, city gas and other utilities.
Realizing stable measurement under temperature & humidity strictly controlled conditions in iron, steel, nonferrous metal and ceramic fields.
Using in the fields of pulp and paper where the resistance of chemical liquid and corrosion liquid is required.
Realizing stable measurement under temperature & humidity strictly controlled condition in machinery and ship building fields.
II Performance Parameters
Zero elevation and suppression:
The maximum zero elevation is the difference between upper range limit and span
The maximum zero suppression no more than the atmospheric pressure
Measuring range
Lower range limit: -100%URL(≥-0.1MPa)~+100%URL-span
Upper range limit: -100%URL+Span(≥-0.1MPa+Span)~+100%URL
Measuring range and zero adjustment
HART manipulator, local button, communication software supported by HART protocol
Response time
When the electrical damping of the transmitter turns off, the response time of the step input applied to the transmitter from 10% to 90% of the output range is less or equal to 0.4s.
III Structural Drawing
V Selection Guide
SGS & TUV Audited Factory
ISO9001:2015 & CE
Explosion-proof & Ex ia Certificates
Partof Product Pictures:
Actual Installation Pictures
FAQ:
1. Q: Are you manufacturer or trading company?
A: We are A professional manufacturer of Pressure/Temperature sensor, wireless transmitters, gateways, even the total solutions of IIOT for more than 11 years in China. With 4~20mA, Hart, Rs485 & Modbus protocols, pressure sensors with 4~20mA, 0.5~4.5V, UARTand etc, also wireless IOT measurement transmitters. We provide high quality products with high competitive factory price.
2. Q: What's your quality control system?
A: As an ISO9001:2008 certificated manufacturer, we have strict quality control system, and each product is done fatigue testing, calibration, temperature compensation before shipment. High quality is guaranteed.
3. Q: Is there MOQ with your product?
A: We have no MOQ limits, 1pc for testing is acceptable.
4. Q: Do you provide customized products?
A: Yes, we can print your logo on our products; OEM, ODM & customization are welcomed.
5. Q: What is the warranty of your products? And after-sales service?
A: Our warranty time is 12 months after shipment, and our after-sales will respond with your questions in 24hrs, remote instruction by PC network is always available.
6. Q: What is lead time of your product?
A: We are factory, our lead time is always within 10~15 working days for products without customization, but lead time will vary based on different products. You can check detail lead time with our sales.
7. Q: What international certificates do you have for your products?
A: we have gained CE, RoHs certificates, and are in the process of gaining ATEX & UL certificates now.
I Product introduction
The pressure transmitter is mainly applied to measure pressure, negative pressure, absolute pressure and other technical data of gas, liquid or vapor, then converts these data into 4~20mA DC signal output. It can connect with HART manipulator to promote self-diagnosis, reset measuring range and auto-zero functions. One side of pressure transmitter's δ cell receives measured pressure,
meanwhile, the other side connects with the air to detect pressure or negative pressure
Applications
Measuring pressure of pipeline and storage tank in petroleum, petrochemical and chemical industry.
Meeting high stability and precision requirements in electric power, city gas and other utilities.
Realizing stable measurement under temperature & humidity strictly controlled conditions in iron, steel, nonferrous metal and ceramic fields.
Using in the fields of pulp and paper where the resistance of chemical liquid and corrosion liquid is required.
Realizing stable measurement under temperature & humidity strictly controlled condition in machinery and ship building fields.
II Performance Parameters
Zero elevation and suppression:
The maximum zero elevation is the difference between upper range limit and span
The maximum zero suppression no more than the atmospheric pressure
Measuring range
Lower range limit: -100%URL(≥-0.1MPa)~+100%URL-span
Upper range limit: -100%URL+Span(≥-0.1MPa+Span)~+100%URL
Measuring range and zero adjustment
HART manipulator, local button, communication software supported by HART protocol
Response time
When the electrical damping of the transmitter turns off, the response time of the step input applied to the transmitter from 10% to 90% of the output range is less or equal to 0.4s.
| Measuring medium: | liquid, gas and vapor |
| Accuracy: | superior to0.1% F.S |
| Insulation resistance: | >100MΩ (100VDC) |
| Damping value: | 0.1~16s (Option) |
| Temperature affecting value: | 0.1%F.S/10ºC |
| Output signal: | 4~20mA(Max 22mA,Min 3.8mA) |
| Communication interface: | HART |
| Intrinsic safety: | EX ia IIC T6 |
| EMC: | EN 61326-1:2013 |
| Enclosure rating: | IP68 |
III Structural Drawing
V Selection Guide
| Selection Guide | |
| Code 1 2 | Product catagory Pressure Transmitter |
| Code 2 B C | Accuracy 0.1%F.S 0.25%F.S |
| Code 3 H M W | Output (4~20)mA & Hart (4~20)mA & ModBus Wireless |
| Code 4 3 4 5 6 7 8 9 0 | Measuring range (while no shift) 0-0.75 ~ 7.5 kPa 0-4.0 ~ 40 kPa 0-18.6 ~ 186 kPa 0-69 ~ 690 kPa 0-200 ~ 2000 kPa 0-690~6900 kPa 0-2000~20000 kPa 0-4000~40000 kPa |
| Code 5 N Q S M G F R C | Process Connection NPT1/4 Female NPT1/2 Female NPT1/2 Male(NPT1/4 Female) M20*1.5 Male G1/2 Male G1/4 Male Remote Seal Customize |
| Code 6 2 3 | Isolating diaphragm 316L stainless steel Hastelloy C |
| Code 7 N F P | Material of Oring Perbunan(NBR) Viton(FKM) Teflon(PTFE) |
| Code 8 0 1 2 | Mounting Bracket No bracket Carbon steel mounting bracket Stainless steel bracket |
| Code 9 C E | Nameplate Chinese English |
| Code M d i k p | Option LCD display Meter Flameproof Ex d IIC T4~T6 Intrinsic safety Ex ia IIC T4~T6 Oil Prohibition Stainless steel tag label |
| Eg. Smart Pressure Transmitter [B] Accuracy: [H] Output Signal: [8] Measuring Range: [Q] Process Connection: [2] Isolating diaphragm: [N] O-ring material process flange [1] Mounting Bracket: [E] Nameplate: [M] Optional: [i] Optional: | ASP2002BH-8Q2N1EMi 0.1% (4~20) mA & HART (0-0.069-6.9)MPa NPT1/2 Male 316L stainless steel Perbunan (NBR) Stainless steel bracket English LCD display Meter Intrinsic safety Ex ia II C T4~T6 |
SGS & TUV Audited Factory
ISO9001:2015 & CE
Explosion-proof & Ex ia Certificates
Partof Product Pictures:
Actual Installation Pictures
FAQ:
1. Q: Are you manufacturer or trading company?
A: We are A professional manufacturer of Pressure/Temperature sensor, wireless transmitters, gateways, even the total solutions of IIOT for more than 11 years in China. With 4~20mA, Hart, Rs485 & Modbus protocols, pressure sensors with 4~20mA, 0.5~4.5V, UARTand etc, also wireless IOT measurement transmitters. We provide high quality products with high competitive factory price.
2. Q: What's your quality control system?
A: As an ISO9001:2008 certificated manufacturer, we have strict quality control system, and each product is done fatigue testing, calibration, temperature compensation before shipment. High quality is guaranteed.
3. Q: Is there MOQ with your product?
A: We have no MOQ limits, 1pc for testing is acceptable.
4. Q: Do you provide customized products?
A: Yes, we can print your logo on our products; OEM, ODM & customization are welcomed.
5. Q: What is the warranty of your products? And after-sales service?
A: Our warranty time is 12 months after shipment, and our after-sales will respond with your questions in 24hrs, remote instruction by PC network is always available.
6. Q: What is lead time of your product?
A: We are factory, our lead time is always within 10~15 working days for products without customization, but lead time will vary based on different products. You can check detail lead time with our sales.
7. Q: What international certificates do you have for your products?
A: we have gained CE, RoHs certificates, and are in the process of gaining ATEX & UL certificates now.